+1 888 123 4567
Reach Truck Singapore
the efficient and versatile ERC electric pallet stacker with capacities of up to 2,000 kilograms is well-suited for storage and retrieval tasks and heights of up to 6 meters as well as for transporting loads over long distances only trained persons with safety shoes are allowed to operate the truck do not carry other people on the forks and do not stand under raised loads the load capacity chart provides information on the load capacities of the truck for different load centers make sure the red emergency stop switch is pulled up start the truck via the access system as soon as the Reach Truck Singapore is ready for use the display shows the battery charge status tilt the control handler towards you use the green rocker switch which can be operated on both sides to determine both the direction of travel and the speed of the truck.
The steer move the control handle for the left or right release the rocker switch to stop or brake by moving the control handle to a vertical position or by pushing it down in tight storage areas simply fold the side arms and stand on platform to operate the truck in pedestrian mode when the red body protection button of the control handle is released the truck immediately moves away from the operator and stops in an emergency that truck can also be stopped by at the emergency stop switch to control the load section and step lessly regulate its lift speed use the lift and lower buttons the optional additional lift is usually operated by other left hand buttons.
Travel and lifting can also be controlled via the optional side touch mode the individually adjustable travel programs and various additional options can be selected on the truck display other equipment options such as assistance systems are operated via the additional display when parking the truck makes sure the load section is completely lowered to avoid accidents turn off the truck to charge the battery the truck must be completely switched off trucks equipped with a maintenance-free lithium-ion battery are connected to the charger by the quick charge socket to
Totten ERC with lead-acid battery open the battery compartment disconnect the battery connector from the truck and connected to the charger plug the chart automatically switches off at the end of the charging process if incriminating has to be intervallic be sure to always turn off the charger first before disconnecting the truck from the charger to maintain the battery check the battery water level using the check points after charging regularly refilled the distilled water in the battery to do this connect the achromatic hose to the water tank the indicator in the hose shows that the process has ended then disengage the hose from the flask and close the battery section.
The truck is now ready for use again in addition to the battery regularly check the wheels load section and hydraulics or damage and contamination for a long service life of battery in truck we recommend regular maintenance by a young Heinrich provision engineer any queries about the truck or how it operates we are nearby please observe their safety instructions further important information on the operation and maintenance of the truck can be originate in the operator's guide provided.
